Call us on
+44-(0)208-2228778

Noise Assessment

The first step of a

Noise survey

is an environmental noise survey. This enables the appraisal of the background noise profile of the area under investigation.

A Noise Assessment will be required by a Local Authority in order to ensure that noise emissions either from fixed plant units (e.g. air-conditioning, extract fans, AHUs), or from a specific indoor or outdoor operation (e.g. religious service, dance schools, live music venues, restaurants, pubs, nightclubs, concerts, outdoor sporting or industrial operations) will not be intrusive and cause noise nuisance to the closest noise-sensitive receivers.

The

Environmental noise survey

should ideally be undertaken at the closest noise-sensitive receiver in order to take an accurate acoustic snapshot of the location which would be affected by the noise source. The results of the environmental noise survey would assist in setting a noise-emissions criterion.

This is usually set by means of the minimum background noise measured during the course of the

noise survey

and is used to set maximum allowable noise emissions from the noise source under investigation

Acoustic report

Overall fast lead to create an acoustic report that will be created according to current regulations (PPG24, and other British and Scottish legal requirements) and so it can be presented to council with the classification of the site.

Noise Impact Assessments

A Noise Impact Assessment will be required by a Local Authority in order to ensure that noise emissions either from fixed plant units (e.g. air-conditioning, extract fans, AHUs), or from a specific indoor, or outdoor operation (e.g. place of worship, dance schools, live music venues, restaurants, pubs, nightclubs, concerts, outdoor sporting or industrial operations) will not be intrusive and cause noise nuisance to the closest, noise-sensitive receivers.
The first step of a Noise Impact Assessment is the undertaking of an environmental noise surveyThis enables the appraisal of the background noise profile of the area under investigation. The results of the environmental noise survey would assist in setting a noise emissions criterion.
The next step is the analysis of all acquired data and the comparison of the source noise levels against the background noise levels.
The final step would involve the noise assessment of the specific noise source and the preparation of a robust noise assessment report which would discharge all noise-related planning conditions related to the specific project.

Fixed Installations

AC unit fun

Usually, when the noise impact assessment involves fixed plant installations (e.g. air conditioning, kitchen extracts), the noise emissions data from the plant's manufacturer would be sufficient to undertake all necessary calculations and prepare a noise assessment report. The relative location of the proposed plant installation would be compared against the location of the closest receiver and any acoustic corrections due to distance or screening would be taken into account.

Should further noise control measures be necessary, they would be included in our noise assessment report.

These may vary depending on each case, but typical mitigation measures would include acoustic enclosures, silencers, or acoustic screens.

Indoor Operations

acoustic player

If the noise source under investigation is an operation from an indoor environment (e.g. noise from a place of worship, pub, live music venue), we would undertake a manual noise survey during its duration. In some cases where a noise-sensitive receiver is in the immediate adjacency to an indoor noise source, we would also investigate the sound reduction properties of the building''s external building fabric, by conducting a simultaneous noise survey inside and outside the building (noise break-out measurement).

Any flanking paths can then be assessed on-site, while remedial measures to the building's shell can be proposed. These can include an upgrade of the current window system, the installation of acoustic doorsets, the setup, or calibration of a noise limiter, the installation of specific features such as lobbies, or the adoption of a robust noise-management scheme.

Outdoor Operations

constration noise

In cases where the noise impact assessment involves an outdoor operation, such as an outdoor concert, sports activities (moto-cross racing, clay-pigeon shooting), or outdoor industrial operations (e.g. quarries, land-fill operations), the procedure would initially include either a manual noise survey, or a long-term monitoring of noise or vibration.

All acquired data would then be analysed and its statistical trends would be compared to relevant Standards and Good Practice Documents such as BS8233, WHO Guidelines for Community Noise, Design Manual for Roads and Bridges and BS4142. Noise and vibration control measures would be proposed, while robust noise management schemes would be drafted in order to be incorporated into an overall Environmental Impact Assessment which is often necessary in this type of projects.